Stirrers & Mixers
Motorised Liquid Stirrer
- The Stirrer is basically a mixer with a fan blade at the bottom.
- It is used for stirring/mixing liquids like juices syrups, curd etc.
- It is also most useful in the food, rubber, chemical and other industries where a homogeneous mix of the liquid is critical to product quality.
- The Stirrer consists of a high-speed motor mounted on a bell housing from where four stainless steel rods extend down and support a frame of stainless steel plates with holes.
- The motor shaft is connected to the fan blade at the bottom with a central stainless steel shaft.
- The stirrer is hung inside the container holding the liquid with the help of a wire rope and winch provided. The bottom of the stirrer is kept about six inches above the bottom of the container.
- When the motor is switched on, the central shaft turns and rotates the blade.
- The blade pushes the liquid through the holes in the stainless steel frame and thus the liquid is broken up into bits and mixes well.
- The stirrer is used for 10 minutes – 30 minutes as required.
- The size of the stirrer may vary according to the quantity of liquid to be mixed at a time.
- The stirrer has an advantage over the conventional mixers in that the liquid is mixed by breaking it up rather than making it revolve in the container.
- This Stirrer with a ½ Hp I Ph motor can be mix about 100 liters of liquid at a time.
- If the liquid is too viscous or foaming type, the Stirrer can be specially made to suit the liquid quantity & application required.
Colloid Mill
Colloid Mill is an ideal and perfect homogenizer-cum-emulsifier. It is used for thoroughly mixing of two or three different types of liquids. It finds its application in various processes like grinding, homogenizing, emulsifying, dispersing, mixing, extracting etc., catering to the needs of several industries, such as
- Pharmaceutical
- Food
- Dairy
- Sweet meats and
- Confectionary
- Chemical
- Paint
- Textile
- Cosmetic
- Soaps and
- Detergents
- Rubber
Operation
In the Colloid Mill the product is subjected to high shearing, cutting, and rubbing forces between two toothed surfaces. The ground material continuously leaves the mill through the outlet pipe, and if required, it can be re circulated.
Salient Features
- All contact parts can be easily and quickly dismantled and cleaned
- Machine is designed for continuous operation
- Cylindrical screen for higher output
- Feed Hopper, recirculating pipe and mouth hopper are supplied as standard with Colloid Mill
- All contact parts of the mill are made of Stainless Steel 304.
Homogeniser
Homogenization is a process used to emulsify one liquid into another or uniformly disperse solid particles throughout a liquid to improve important product qualities. We manufacture a durable range of homogeniser machines which comprises of positive displacement pump. The displacement pump forces the product under high pressure through a small adjustable gap between the valve and the valve seat, causing turbulence and intense mixing. The advantages of this machine are
- Enhanced Color
- Longer shelf life
- More uniformity
- Viscosity Control
- Improved Stability
- More consumer appeal
- Improved reaction time
- Enhanced texture and taste
- Batch-to-batch consistency
- Particle size control & uniformity
It useful in the following industries
- Juice Processing
- Chemicals
- Dairy
- Paint
- Pharmaceuticals
The machine is sturdily built and all contact parts are SS 304. It is available with the following output capacities
| Motor HP | Output Capacity |
|---|---|
| 3 HP | 300 liters / hour |
| 5 HP | 500 liters / hour |
| 10 Hp | 1000 liters / hour |